If you have questions in your mind about the product or fertility in general, you’re not alone. We’ve collated a bunch of questions we often get from our customers, so you can have your doubts cleared. Read on.
Ovulation is the process that usually happens once in every menstrual cycle, when hormone changes trigger the ovary to release an egg. One of the eggs that is contained in your ovaries, grows and matures during the first part of each menstrual cycle, and if a sperm fertilizes the egg, you become pregnant.
Ovulation patterns change for every individual and even every cycle. However, typically it typically happens 12 to 16 days before your next period starts.
Tracking your cycle essentially allows you to understand your body better, including fertile days.
Not all women notice all signs of ovulation. However, typically there's a change in cervical fluids, abdominal bloating, light spotting, a surge in hormones, etc.
That’s mostly a myth. Ovulation depends on many factors like your cycle length, hormone levels, etc., it can’t be generalised.
As a woman grows older, her chances of conceiving diminishes. However, if you maintain overall good health, you can definitely get pregnant.
Generally, only one ovulation happens per cycle. You can, however, ovulate two (or more) eggs at the same time. When this happens, there is the potential to conceive fraternal (non-identical) twins if both eggs are fertilized.
Not at all. Irregular periods makes identifying your exact fertile window a bit difficult, that’s all!
Shorter cycles indicate that the cycle is shorter than 21 days. Ovulation dates depend on the exact cycle length and it’s individual for every woman. So if typically ovulation occurs roughly 10-16 days before the next period, for a woman with a shorter cycle, she may ovulate early in the cycle, say on day 7-10.
In a perfect world, the day that your vaginal discharge is the thickest is indicative of ovulation. But this is not always the best way to track ovulation for several reasons - the amount of discharge can’t be accurately measured. What’s more, not all women have prominent signs of ovulation, which is why tracking isn’t as easy and a monitor like Inito can help.
Maintaining an ideal BMI and a good lifestyle is essential to keep hormone levels from fluctuating. And hormone levels have a huge role to play in ovulation, and therefore, the chances of getting pregnant.
A woman should not ovulate more than once during each cycle. This is due to a careful balance of hormones and their levels – it takes just the right timing and release of hormones to bring on the release of a mature egg. Therefore, she cannot get pregnant more than once during a cycle.
This kit contains the following: Fertility Monitor (which will have to be synced to your phone), Mounting Clip (custom-made for your phone model), Test Cup (for urine collection), Ovulation Test Strips (10 Nos), user guide and warranty card.
You can buy extra strips from our website www.inito.com. Just opt for the number of strips you’d need, you can opt for a pack of 8, 16, or 32 according to your requirement.
It’s simple! As soon as you place your order, you’ll get a message, followed by a call from our support team asking you to confirm your phone model. (We’re compatible with most phones.) If we get the confirmation within 48 hours, the clip adapter will be shipped along with the device.
We typically take around 2 working days to process your order, post which your product will be shipped. Shipping time depends on where you’re located.
If the kit is unused and seal unbroken, it can be returned within 7 days. Please check our policy for more details.
Yes, the device is covered under a 180 day manufacturing defect guarantee. Please check our policy for more details.
What Inito basically does is that it removes the guesswork out of conception. It helps you identify your ovulation window, detect your peak fertile days and keep track of your cycle very closely. Thereby helping you understand your body patterns better. And understanding fertility is the first step towards getting pregnant.
The device checks for the level of hormones (Luteinizing & Estrogen) in your urine and identifies high fertility or peak fertility days. If you have intercourse on your high fertile days and definitely on your peak fertile days, your chances of conception increase by 89%.
As per a clinical study, the Inito fertility monitor is 99% accurate when compared to follicular scans and lab grade reader devices. However, the device works best if the user takes regular tests when asked to by the app, with the first urine of the day. You’ll then be recommended exact ovulation days according to your hormone levels. It is advisable that you use the device for at least 2-3 cycles for us to understand your body patterns better. The inito monitor has undergone multiple levels of testing, it has been validated by lab grade readers, ELISA Method as well as Ultrasound based Follicular scanning. Also, doctors all over the country have tested and validated Inito. The accuracy report of the same can be found in the clinical accuracy section on our website.
The results of other ovulation kits need to be self-interpreted while Inito’s results are read digitally. This provides highly accurate results. Also, Inito measures two key fertility hormones in urine and gives upto 6 fertile days as compared to the ovulation kits which look into only one hormone and give 2 - 3 fertile days.
The biggest advantage with Inito is that you can monitor your hormones right at home. It reminds you when you’re supposed to use it. It’s safe and easy to use with an accuracy of 99%. What’s more, it’s more economical than follicular scans and removes the guesswork as compared to OPKs.
You can store the device in the Inito box it comes in, just make sure you keep it in a dry and cool place.
The device has a battery life of 1 year, a guarantee of 6 months and a defect replacement warranty of 180 days. We’ve got you covered, provided you store it safe.
Don’t worry, that’s by design, the blinking of the light is a normal feature of the device.
No, the Inito monitor only predicts and tracks your ovulation days as of now. Our team is working on adding more features/tests, we’ll be able to confirm pregnancy soon. Please stay tuned for updates.
You can buy extra strips from our website www.inito.com. Just opt for the number of strips you'd need, you can opt for a pack of 10 or 20, according to your requirement.
First, make sure you’ve downloaded the Inito fertility & ovulation app, signed up with your email ID and synced your monitor to your phone. Then attach the clip to your monitor and then fix it to your phone. Post that, the app will guide you through every step. You can also refer to the user handbook for detailed instructions.
All you have to do is follow the app updates. You’ll be asked to enter your last period dates and take tests. Please refer to the user handbook for a detailed guide.
Worry not, wait till your next period comes and enter the date.
Please give our support team a call, we’ll edit the date on the calendar for you.
The usage of strips is dependent on your cycle length. If your cycle length ranges from 21-32 days, then you will need 8-9 tests in a cycle. If your cycle length ranges from 33-45 days, then you’ll require 15-16 tests in a cycle.
You can buy extra strips from our website www.inito.com. We sell it in a pack of 10.
The strip is valid for 15 mins. After that, it may give a different result, and it cannot be reused.
All you have to do is follow this simple process: Collect your urine in a clean container, dip the test strip in the urine for 15 seconds, attach the monitor to your phone using the clip adaptor, open the app and insert the strip into the monitor. You’ll get the results immediately, along with our diagnosis. Please refer to the user handbook for a detailed guide.
Inito works best if used for 2-3 cycles to obtain a positive result. The more you use it, the more our predictive app learns about your body and hormone patterns and the better the results.
No you don’t have to, we’ll do that for you and then recommend next steps.
Ovulation is the process of the egg being released from the ovary and this happens 12-16 days before the next period starts. Whereas fertile days are all the days during a woman's menstrual cycle when she has the ability to become pregnant if she has sexual intercourse. A woman typically has 6 fertile days in each cycle and she’s at her most fertile on the day of ovulation and the day before.
This can be an indication of lower levels of Luteinizing Hormones (LH) and high levels of Estrogen (E3G). Don’t worry, it’s normal to have low levels of LH in some cycles. Making some dietary changes can help you to overcome this issue. Please try to take a test next cycle so we can offer you better results.
Yes, taking the next test will help us in predicting your fertile days for the next cycle.
Sometimes the E3G hormone may have risen much earlier and the LH may not have surged yet. In such cases, the app adds more tests. Once the device detects a sufficient level of LH rise, it gives you peak fertility.
The number of tests given per cycle depends completely upon the cycle length and the hormone levels that are detected.
No. When the result is given as peak fertility, it means the LH has risen and ovulation is expected to happen within 24-36 hours.
The 6th-day reference test falls on the 6th day of your cycle. The body's hormone levels are measured on this day. The app basically uses this information to understand how the hormones are increasing and changing as compared to the 6th day and then suggests fertile days.
Please give us a call, we’ll enter your period/cycle details for you in the backend and help you out.
The reference test is mostly used for estrogen level detection. When it comes to LH, knowing the levels via the reference test will help the app predict peak fertility better. If the user has high levels of LH naturally, then the app will take that under consideration when giving peak fertility, or, it may help detect if the user is taking any medication or having problems like an Anovulatory cycle.
The hormones vary day to day and even on an hourly basis. If low levels of hormones were detected in the morning and the levels went up significantly, the results given may change.
Inito sends notifications early in the morning on the days when tests need to be taken. It automatically adds or removed tests depending upon the hormone values that are detected and the results that are given.
High fertility is given when the hormone levels have gone up. It is recommended to have sexual contact every alternate day in this period to increase chances of conception.
To get the best results, it is important to take all the tests with the first urine of the day. If the tests are missed, the app will enable further tests but you might get a lesser number of fertile days or miss Peak Fertility.
Every new test on a new day will need a new strip. The strip should be used only once for the test. If multiple tests are taken with the same strips or if the strip is used later, it may have dried and may give incorrect results.
We recommend that you take a test from the 6th day of your cycle, so we can track your basic hormone levels so as to predict fertile days.
We generally suggest that you take a test with the first urine of the day, on the days tests have been recommended by the app.
Sit back and relax. Stay tuned to the app and wait for further instructions.
Please give us a call, our Clinical Support team would be happy to help you.
Once you take a test and insert the test stip into the monitor, the app will show the results immediately along with our recommendations.
Yes, it will work provided your cycle length is between 21-45 days.
You don’t need to, but you can if you want to. Inito basically helps you identify your fertile days by asking you to take tests that help us observe your hormone levels better.
Fertility monitoring tests are based on your hormone levels. During Thyroid, Diabetes, PCOS and PCOD treatment, your hormones tend to change so before using a fertility monitor when on these medications, kindly let us know about it so we can make a note and help you further.
Of course, it will! However, do give our clinical support team a call so they can understand your case better.
Inito helps you get pregnant naturally by tracking your hormones. It’s best to try it for at least 2 - 3 cycles. If a couple wants to try for IUI, then it should be a doctor’s recommendation. IUI has a 20% chance of success and the doctor may recommend follicular scans and maybe even medicines before injecting the sperm. The IUI process can be done only once every cycle while Inito will give up to 6 fertile days when intercourse can be done to increase the chances of pregnancy.
You can take your pregnancy test after 6 days from your expected period date. After 14 days, you can go to the Path Lab and ask for a βHCG test. That will help confirm your pregnancy.
Since the Inito app works with a predictive algorithm, the more your use it, the better we understand your body and hormone patterns. We recommend that you use the device for at least 6 months to increase your chances of getting pregnant.
If your periods are generally regular, please share your medical history with our Clinical Support team. They will be able to guide you with next steps.
AMH hormone is released by the dormant follicles and is basically an indication of the ovarian reserve. If the hormone is above 5.0ng/ml, one may have PCOS.
Estrogen, a key fertility hormone, starts rising 3-4 days before ovulation while LH rises 24-36 hours before ovulation. Tracking and having sexual intercourse on these days will increase your chances of getting pregnant by 89%.
If the couple has missed having intercourse on the peak fertile day but had intercourse in their high fertile days, there is still a chance of pregnancy.
Maintaining a healthy lifestyle is key. Make sure you eat well, sleep well and live stress-free. Please read our blog for tips.
Please speak to our Clinical Support team and tell them about the medicines you’re on, so we can advise you further.
That’s great news! Please take a pregnancy test or see your gynecologist to confirm the status.
Your exact ovulation dates can vary according to your cycle length, so to find out when you’re most fertile, we ask you to confirm this. To calculate the length, you need to count from the first day of your period to the day before your next period starts.
Samplytics Technologies Private Limited
1st Floor, #285, 11th Main, Koramangala 4th Block, Bengaluru, 560034, IN